Influence of Heat Treatment on the Physicochemical Property and Mineral Composition of Various Processed Salts

Abstract

The effects of heat treatment on the physicochemical properties and mineral composition of sun-dried salt were investigated. The salts parched at high temperature were appeared the higher alkalinity and the lower oxidation-reduction potential (ORP) than the samples Without heat treatment. The commercial salts (bamboo salt and yellow loess salt) and the Sun-dried salt parched at high temperature had relatively higher sodium ion content (418456 ppm) compared to that (418.0 ppm) of refined salt. The increase of calcium ion occurred in the salts parched at high temperature compared to the sun-dried salt without heat treatment, but the magnesium ion vas vice versa. The commercial salt, yellow loess salt had highest turbidity (0.973) whereas Sun-dried salt showed lowest level (0.097) among the tested samples. Turbidity of heat treatment samples decreased as solubility increased. The maximum concentration of dialyzed salt was reached after 4 hr regardless of various processed salts, but those had no difference significantly, among the tested samples. The X-ray diffraction patterns of the parched sun-dried salts showed different peak intensity with common salts, and they were similar to the patterns of oxide salts, especially MgO. The maximum value (2.56%) of MgO appeared in the sun-dried salt parched at 1,400 degrees C.