Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Low temperature epoxy bonding for wafer level MEMS packaging
- Issue Date
- 16-May-2008
- Publisher
- ELSEVIER SCIENCE SA
- Keywords
- microelectromechanical system (MEMS); epoxy bonding; wafer level packaging; cu via; low temeprature
- Citation
- SENSORS AND ACTUATORS A-PHYSICAL, v.143, no.2, pp.323 - 328
- Indexed
- SCIE
SCOPUS
- Journal Title
- SENSORS AND ACTUATORS A-PHYSICAL
- Volume
- 143
- Number
- 2
- Start Page
- 323
- End Page
- 328
- ISSN
- 0924-4247
- Abstract
- In this paper, we report on a technology for wafer-level MEMS packaging with vertical via holes and low temperature bonding using a patternable B stage epoxy. We fabricated via holes for vertical feed-throughs and then applied bottom-up copper electroplating to fill the via holes. For low temperature wafer level packaging, we used B-stage epoxy bonding in the sealing line. The optimal bonding parameters were 150 degrees C and 30 min. The tensile strength was about 15 MPa. Therefore, this packaging technology can be used for low temperature wafer level packaging for many MEMS devices. (c) 2007 Elsevier B.V. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > School of Electrical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
Related Researcher
- Ju, Byeong kwon
- College of Engineering (School of Electrical Engineering)