Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Migration of monomers, plastic additives, and non-intentionally added substances from food utensils made of melamine–formaldehyde resin following ultraviolet sterilization

Authors
Kim, H.S.Lee, Y.J.Koo, Y.J.Pack, E.C.Lim, K.M.Choi, D.W.
Issue Date
7월-2021
Publisher
Elsevier Ltd
Keywords
Melamine–formaldehyde resin; Migration; Monomer; Non-intentionally added substances; Plastic additives; Safety assessment; Ultraviolet exposure
Citation
Food Control, v.125
Indexed
SCIE
SCOPUS
Journal Title
Food Control
Volume
125
URI
https://scholar.korea.ac.kr/handle/2021.sw.korea/128748
DOI
10.1016/j.foodcont.2021.107981
ISSN
0956-7135
Abstract
Ultraviolet (UV) sterilization of kitchenware is considered environmentally friendly and economical. However, there are many cases of extended UV irradiation, which raises concerns about the release of hazardous substances. Here, we investigated the migration of monomers, plastic additives, and non-intentionally added substances (NIAS) from food utensils made of melamine–formaldehyde resin into food simulants after UV irradiation for up to 7 d. The migration of monomers (melamine and formaldehyde) was analyzed using a high-performance liquid chromatograph with a diode array detector. When irradiated with a UV lamp for 7 d, the release of melamine from food utensils made of melamine–formaldehyde resins increased by up to 85-fold compared with that from the unexposed samples. Formaldehyde release increased up to 4-fold after UV exposure. UV exposure led to a sustained increase in melamine migration in a time-dependent manner. Formaldehyde release also increased on the first day, but plateaued after seven days of exposure. Safety assessment demonstrated that there is a low risk of melamine and formaldehyde exposure of up to 11.78% and 7.95%, respectively, compared with the tolerable daily intake. Non-target screening analysis of plastic additives and NIAS from melamine–formaldehyde resin and other synthetic resins was performed using high-performance liquid chromatography quadrupole time-of-flight mass spectrometry. Exposure of melamine–formaldehyde resin to UV for 7 d drastically increased the release of plastic additives and NIAS. In contrast, for other synthetic resins (polypropylene, polyamide, polyethylene, polyethylene terephthalate, and silicone), the peaks of these compounds disappeared or decreased after UV exposure, indicating that the melamine–formaldehyde resin is less resistant to UV degradation than other synthetic resins. © 2021 Elsevier Ltd
Files in This Item
There are no files associated with this item.
Appears in
Collections
College of Health Sciences > School of Health and Environmental Science > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetrics

Total Views & Downloads

BROWSE