Novel camphene/photopolymer solution as pore-forming agent for photocuring-assisted additive manufacturing of porous ceramics
- Authors
- Choe, Gyu-Bin; Kim, Gyu-Nam; Lee, Hyun; Koh, Young-Hag; Kim, Hyoun-Ee
- Issue Date
- 1월-2021
- Publisher
- ELSEVIER SCI LTD
- Keywords
- Porous ceramics; Porogen; Additive manufacturing; Photopolymerization
- Citation
- JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.41, no.1, pp.655 - 662
- Indexed
- SCIE
SCOPUS
- Journal Title
- JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Volume
- 41
- Number
- 1
- Start Page
- 655
- End Page
- 662
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/50265
- DOI
- 10.1016/j.jeurceramsoc.2020.08.012
- ISSN
- 0955-2219
- Abstract
- This study proposes camphene/photopolymer solutions as a novel pore-forming agent for the photocuring-assisted additive manufacturing of porous ceramics. Unlike conventional techniques using molten camphene, solid camphene can be directly dissolved in the photocurable monomer hexanediol diacrylate (HDDA) at room temperature, which can then crystallize with a dendrite-like morphology based on phase separation at lower temperatures. This unique approach allows alumina suspensions to solidify at -2 degrees C and then effectively be photopolymerized using a digital light processing engine, resulting in camphene-rich crystals surrounded by photopolymerized alumina/HDDA walls. Sintered samples exhibited a highly porous structure, with the pores created after the removal of the camphene-rich crystals. Two different pore sizes were obtained in the lower and upper regions of a single layer, due to a decrease in the solidification rate along the building direction, although their porosities were similar (similar to 52 vol%). The porous samples exhibited a compressive strength of similar to 265 MPa.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Graduate School > Department of Bioengineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.