Amorphous oxide based microcavity color filter with high selectivity
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Byeong Hyeon | - |
dc.contributor.author | Hwang, Jin Young | - |
dc.contributor.author | Kim, Sangsig | - |
dc.contributor.author | Lee, Sang Yeol | - |
dc.date.accessioned | 2021-08-31T11:38:45Z | - |
dc.date.available | 2021-08-31T11:38:45Z | - |
dc.date.created | 2021-06-18 | - |
dc.date.issued | 2020-02 | - |
dc.identifier.issn | 0925-3467 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/57891 | - |
dc.description.abstract | Amorphous oxide based thin film visible light color filters have been fabricated by using a microcavity structure with amorphous silicon-zinc-tin-oxide (a-SZTO) and silver (Ag) multilayer. Metal-oxide-metal microcavity structure adopted transparent amorphous oxide materials because their high refractive index (n) values (higher than 2) and amorphous phase which does not include grain boundary are useful to obtain highly selective color filtering characteristics with high transparency as well as simple fabrication process and reliable reproducibility. The refractive index (n) values and extinction coefficient(k) values of a-SZTO were extracted by using ellipsometry. The simulation program was used to design to optimize color filter at each wavelength. The color filter was fabricated by changing the thickness of the middle a-SZTO layer at fixed thickness of upper and bottom Ag layer. As the thickness of the middle a-SZTO layer increased, the wavelength shifted in the direction of longer wavelength, and filtered visible color is varied from blue to red. The amorphous oxide based color filter showed high transmittance of over 60% mainly due to amorphous phase of a-SZTO and each color filters for red, green and blue exhibited highly selective visible light filtering characteristics with narrow full-width at half maximum of less than 30 nm mainly due to high refractive index of a-SZTO. The electrical characteristics were measured by using Hall measurement system, with a very low resistivity of about similar to 10(-5) Omega cm. These results can be directly applied to the electrode materials of the organic solar cell and the color electrode for photovoltaics. | - |
dc.language | English | - |
dc.language.iso | en | - |
dc.publisher | ELSEVIER | - |
dc.subject | FABRICATION | - |
dc.title | Amorphous oxide based microcavity color filter with high selectivity | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Kim, Sangsig | - |
dc.identifier.doi | 10.1016/j.optmat.2020.109693 | - |
dc.identifier.scopusid | 2-s2.0-85078443766 | - |
dc.identifier.wosid | 000521515700061 | - |
dc.identifier.bibliographicCitation | OPTICAL MATERIALS, v.100 | - |
dc.relation.isPartOf | OPTICAL MATERIALS | - |
dc.citation.title | OPTICAL MATERIALS | - |
dc.citation.volume | 100 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Optics | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Optics | - |
dc.subject.keywordPlus | FABRICATION | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.