Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Impacts of ambient temperature, DPF regeneration, and traffic congestion on NOx emissions from a Euro 6-compliant diesel vehicle equipped with an LNT under real-world driving conditions

Authors
Ko, JinyoungMyung, Cha-LeePark, Simsoo
Issue Date
1-3월-2019
Publisher
PERGAMON-ELSEVIER SCIENCE LTD
Keywords
Real driving emissions (RDE); NOx emission; Lean NOx trap (LNT); Ambient temperature; Diesel particulate filter (DPF) regeneration; Traffic congestion
Citation
ATMOSPHERIC ENVIRONMENT, v.200, pp.1 - 14
Indexed
SCIE
SCOPUS
Journal Title
ATMOSPHERIC ENVIRONMENT
Volume
200
Start Page
1
End Page
14
URI
https://scholar.korea.ac.kr/handle/2021.sw.korea/67042
DOI
10.1016/j.atmosenv.2018.11.029
ISSN
1352-2310
Abstract
A real driving emissions test procedure was introduced as a supplement to the chassis dynamometer test to diminish the discrepancy between on-road emissions and type approval certification emissions. In this study, on-road NOx emissions from a 2.2 L diesel vehicle equipped with a lean NOx trap were measured not by a portable emissions measurement system but by NOx sensors and an exhaust flow meter. This method provides a strategy for analyzing on-road NOx emissions with a measurement system that is relatively cheap, light and simple. The effects of ambient temperature, diesel particulate filter regeneration, traffic congestion, NOx conversion efficiency and uphill/downhill sections on NOx emissions were evaluated by comparing the NOx emissions characteristics using engine-out and lean NOx trap-out NOx sensors. NOx emissions in congested traffic conditions were 29% higher than those in smooth traffic conditions. NOx emissions at 33 degrees C were 55% higher than those at 27 degrees C. Additionally, NOx emissions under specific conditions with diesel particulate filter regeneration were 30% higher than those under normal conditions. The average on-road NOx emission factor for all test cases was 7.35, but this value decreased to 5.7 when an ambient temperature corrective factor (1.6) was applied for extended test conditions.
Files in This Item
There are no files associated with this item.
Appears in
Collections
College of Engineering > Department of Mechanical Engineering > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetrics

Total Views & Downloads

BROWSE