자동차 엔진용 Thrust Washer 생산을 위한 판형 소재의 단조 공정기술개발 및 이를 위한 유한요소해석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 강봉기 | - |
dc.contributor.author | 윤중현 | - |
dc.contributor.author | 정주노 | - |
dc.contributor.author | 정현환 | - |
dc.contributor.author | 이원석 | - |
dc.contributor.author | 한수희 | - |
dc.contributor.author | 최원만 | - |
dc.date.accessioned | 2021-09-02T18:24:48Z | - |
dc.date.available | 2021-09-02T18:24:48Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 2508-5093 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/79281 | - |
dc.description.abstract | In this paper, we present a study on the development of the manufacturing process of thrust washers for an automobile. The thrust washers are manufactured using the progressive cold forging method. The proposed progressive cold forging method requires less manufacturing cost and processing time compared with the previous conventional manufacturing method, through the elimination of some cutting and grinding processes. The proposed cold forging method uses the single plate material that is used in multi-step forging process (progressive method). In order to estimate the plastic deformation of the product due to cold forging, we conduct a finite-element analysis and compare the predicted deformation with the experimental results. The effectiveness of the proposed manufacturing process is verified by comparing the simulation and experimental results. Finally, we suggest a new stereotyped design of the single plate type cold forging process, based on the data obtained by performing simulation and experiments. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 한국생산제조학회 | - |
dc.title | 자동차 엔진용 Thrust Washer 생산을 위한 판형 소재의 단조 공정기술개발 및 이를 위한 유한요소해석 | - |
dc.title.alternative | Development of A Plate-type Cold Forging Manufacturing Process and Finite Element Analysis for Producing Thrust Washer of Automotive Engine | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 정현환 | - |
dc.identifier.doi | 10.7735/ksmte.2018.27.1.46 | - |
dc.identifier.bibliographicCitation | 한국생산제조학회지, v.27, no.1, pp.46 - 56 | - |
dc.relation.isPartOf | 한국생산제조학회지 | - |
dc.citation.title | 한국생산제조학회지 | - |
dc.citation.volume | 27 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 46 | - |
dc.citation.endPage | 56 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002315259 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Thrust washer | - |
dc.subject.keywordAuthor | Cold forging | - |
dc.subject.keywordAuthor | Forging process | - |
dc.subject.keywordAuthor | Forging analysis | - |
dc.subject.keywordAuthor | Deformation analysis | - |
dc.subject.keywordAuthor | Progress pressing | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.