오비탈 연삭시스템의 연삭가공 열변형 오차 해석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이현민 | - |
dc.contributor.author | 최우천 | - |
dc.contributor.author | 조창래 | - |
dc.contributor.author | 조순주 | - |
dc.date.accessioned | 2021-09-04T05:48:56Z | - |
dc.date.available | 2021-09-04T05:48:56Z | - |
dc.date.created | 2021-06-18 | - |
dc.date.issued | 2016 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | https://scholar.korea.ac.kr/handle/2021.sw.korea/90465 | - |
dc.description.abstract | An orbital grinding system uses a special motion to machine crankshafts in ships. When a crankshaft is operated, eccentric pins rotate and a grinding wheel moves in order to grind the pins. Thermal error caused by heat generated in the grinding process decreases the quality of the final product. In this study, the thermal error of an orbital grinding system caused by heat generation was investigated in order to predict the extent of thermal error that can occur during the grinding process. Since the machine position changes during orbital grinding, the pin part is divided into 30 degree intervals and heat is generated. Total thermal error was measured by summing the thermal errors associated with the pin and the grinding wheel. Total thermal error was found to reach a maximum at 60 degrees and a minimum at 210 degrees because of the shape of the crankshaft. | - |
dc.language | Korean | - |
dc.language.iso | ko | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 오비탈 연삭시스템의 연삭가공 열변형 오차 해석 | - |
dc.title.alternative | Thermal Deformation Analysis of an Orbital Grinding System Grinding Process | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 최우천 | - |
dc.identifier.bibliographicCitation | 한국정밀공학회지, v.33, no.7, pp.595 - 600 | - |
dc.relation.isPartOf | 한국정밀공학회지 | - |
dc.citation.title | 한국정밀공학회지 | - |
dc.citation.volume | 33 | - |
dc.citation.number | 7 | - |
dc.citation.startPage | 595 | - |
dc.citation.endPage | 600 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002125349 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Orbital grinding (오비탈 연삭가공) | - |
dc.subject.keywordAuthor | Thermal error (열변위 오차) | - |
dc.subject.keywordAuthor | Crankshaft (크랭크샤프트) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(02841) 서울특별시 성북구 안암로 14502-3290-1114
COPYRIGHT © 2021 Korea University. All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.