Material and bond properties of ultra high performance fiber reinforced concrete with micro steel fibers
- Authors
- Yoo, Doo-Yeol; Shin, Hyun-Oh; Yang, Jun-Mo; Yoon, Young-Soo
- Issue Date
- 3월-2014
- Publisher
- ELSEVIER SCI LTD
- Keywords
- Fibers; Fracture; Analytical modeling Bond
- Citation
- COMPOSITES PART B-ENGINEERING, v.58, pp.122 - 133
- Indexed
- SCIE
SCOPUS
- Journal Title
- COMPOSITES PART B-ENGINEERING
- Volume
- 58
- Start Page
- 122
- End Page
- 133
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/99100
- DOI
- 10.1016/j.compositesb.2013.10.081
- ISSN
- 1359-8368
- Abstract
- For investigating the effect of fiber content on the material and interfacial bond properties of ultra high performance fiber reinforced concrete (UHPFRC), four different volume ratios of micro steel fibers (V-f = 1%, 2%, 3%, and 4%) were used within an identical mortar matrix. Test results showed that 3% steel fiber by volume yielded the best performance in terms of compressive strength, elastic modulus, shrinkage behavior, and interfacial bond strength. These parameters improved as the fiber content was increased up to 3 vol.%. Flexural behaviors such as flexural strength, deflection, and crack mouth opening displacement at peak load had pseudo-linear relationships with the fiber content. Through inverse analysis, it was shown that fracture parameters including cohesive stress and fracture energy are significantly influenced by the fiber content: higher cohesive stress and fracture energy were achieved with higher fiber content. The analytical models for the ascending branch of bond stress-slip response suggested in the literature were considered for UHPFRC, and appropriate parameters were derived from the present test data. (C) 2013 Elsevier Ltd. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > School of Civil, Environmental and Architectural Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.