The effects of Mn-doping and electrode material on the resistive switching characteristics of ZnOxS1-x thin films on plastic
- Authors
- Han, Y.; Cho, K.; Park, S.; Kim, S.
- Issue Date
- 2014
- Keywords
- Doping effect; Resistive switching; Unipolar; ZnOxS1-x
- Citation
- Transactions on Electrical and Electronic Materials, v.15, no.1, pp.24 - 27
- Indexed
- SCOPUS
KCI
- Journal Title
- Transactions on Electrical and Electronic Materials
- Volume
- 15
- Number
- 1
- Start Page
- 24
- End Page
- 27
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/100774
- DOI
- 10.4313/TEEM.2014.15.1.24
- ISSN
- 1229-7607
- Abstract
- In this study, the effects of Mn-doping and the electrode materials on the memory characteristics of ZnOxS1-x resistive random access memory (ReRAM) devices on plastic are investigated. Compared with the undoped Al/ZnOxS1-x/Au and Al/ ZnOxS1-x /Cu devices, the Mn-doped ones show a relatively higher ratio of the high resistance state (HRS) to low resistance state (LRS), and narrower resistance distributions in both states. For the ZnOxS1-x devices with bottom electrodes of Cu, more stable conducting filament paths are formed near these electrodes, due to the relatively higher affinity of copper to sulfur, compared with the devices with bottom electrodes of Au, so that the distributions of the set and reset voltages get narrower. For the Al/ ZnOxS1-x /Cu device, the ratio of the HRS to LRS is above 106, and the memory characteristics are maintained for 104 sec, which values are comparable to those of ReRAM devices on Si or glass substrates © 2014 KIEEME. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > School of Electrical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.