Energy harvester using PZT nanotubes fabricated by template-assisted method
- Authors
- Jung, Woo-Suk; Do, Young-Ho; Kang, Min-Gyu; Kang, Chong-Yun
- Issue Date
- 7월-2013
- Publisher
- ELSEVIER
- Keywords
- PbZr0.52Ti0.48O3; Anodic aluminum oxide; Nanostructure; Piezoelectric
- Citation
- CURRENT APPLIED PHYSICS, v.13, pp.S131 - S134
- Indexed
- SCIE
SCOPUS
KCI
- Journal Title
- CURRENT APPLIED PHYSICS
- Volume
- 13
- Start Page
- S131
- End Page
- S134
- URI
- https://scholar.korea.ac.kr/handle/2021.sw.korea/102786
- DOI
- 10.1016/j.cap.2013.01.009
- ISSN
- 1567-1739
- Abstract
- Lead zirconate titanate (PZT) nanotubes fabricated by template-assisted method using sol-gel solution infiltration are applied for energy harvester. To fabricate PZT nanotubes, an anodic aluminum oxide is used for the template, and as-prepared PZT solution dropped on the surface of the AAO is infiltrated by vacuum pump into the pores in the AAO. The template including PZT solution is dried at 80 degrees C for 1 min and dried again at 300 degrees C for 10 min, and then it treated at 650 degrees C for 30 min to anneal PZT and form the expected perovskite phase. The fabricated nanotubes were mixed with PDMS polymer composite and polyimide films coated Pt/Ti were used for electrodes. Finally, it demonstrated that the energy harvester could generate the output power of 37 nW/cm(2). (C) 2013 Elsevier B.V. All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Graduate School > KU-KIST Graduate School of Converging Science and Technology > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.