Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Experimental study on transient response according to variation of rib height at fuel cell plate
- Authors
- Nam, K.H.; Yun, S.H.; Han, S.H.; Choi, N.H.; Choi, Y.D.
- Issue Date
- 2013
- Publisher
- Korean Society of Mechanical Engineers
- Keywords
- Clamping Pressure; GDL; Transient Response; Variation of Rib
- Citation
- Transactions of the Korean Society of Mechanical Engineers, B, v.37, no.11, pp.1009 - 1014
- Indexed
- SCOPUS
KCI
- Volume
- 37
- Number
- 11
- Start Page
- 1009
- End Page
- 1014
- ISSN
- 1226-4881
- Abstract
- In the present study, using a variation of rib height, the transient response and the performance are investigated. The cell voltage is acquired according to the current density change(0.8A/cm2 to 1.0A/cm 2) under same stoichiometry and relative humidity. The different level of undershoots appeared at the different clamping pressure(1.5MPa and 2.0MPa) and different rib height. At 1.5MPa clamping pressure, rib manufactured cut at 100μm height goes to steady state faster than reference plate and has lower maximum undershoot voltage. But performance is lower than reference plate due to increasing contact resistance. © 2013 The Korean Society of Mechanical Engineers.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Mechanical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.