Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
EFFECT OF FABRICATION ON HIGH CYCLE FATIGUE PROPERTIES OF COPPER THIN FILMS
- Issue Date
- 8월-2008
- Publisher
- SPRINGER
- Keywords
- mechanical properties; thin film; copper; high cycle fatigue test
- Citation
- ACTA MECHANICA SOLIDA SINICA, v.21, no.4, pp.318 - 326
- Indexed
- SCIE
SCOPUS
- Journal Title
- ACTA MECHANICA SOLIDA SINICA
- Volume
- 21
- Number
- 4
- Start Page
- 318
- End Page
- 326
- ISSN
- 0894-9166
- Abstract
- The influence of fabrication on the tensile and fatigue behavior of copper films manufactured by 3 kinds of fabrication methods was investigated. The tensile and high cycle fatigue tests were performed using the test machine developed by authors. Young's moduli (72, 71 and 69 GPa, respectively) are lower than the literature values (108-145 GPa), while the yield strengths were as high as 358, 350 and 346 MPa, respectively and the ultimate strengths as 462, 456 and 446 MPa, respectively. There is not much difference in the tensile properties of the 3 kinds of films. There is little difference in the fatigue properties of the 3 kinds of films but one of them has shorter fatigue life than others in high cycle region and longer fatigue life than others in low cycle region.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Mechanical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.