ScholarWorks@Korea University

Journal of Mechanical Science and Technology

Journal Title

  • Journal of Mechanical Science and Technology

ISSN

  • E 1976-3824 | P 1738-494X | 1738-494X | 1976-3824

Publisher

  • 대한기계학회

Listed on(Coverage)

JCR2005-2019
SJR1999-2019
CiteScore2011-2019
SCIE2010-2021
CC2016-2021
SCOPUS2017-2020
KCI(Ranking)2009-2019
KCI2001-2021
KCI(Candidate)1998-2000

Active

  • Active

    based on the information

    • SCOPUS:2020-10

Country

  • SOUTH KOREA

Article List

1 - 20 out of 72 results.

SCIESCOPUSKCI
Translocation of charged particles through a thin micropore under pressure-driven flow

Moon, Junsang; Song, Chang Woo; Han, Chang-Soo

ArticleIssue Date2022CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.36, no.10, pp.5181 - 5189PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Development of a robot OLP system for the continuous motion control of a mandrel in the radial braiding process

Han, Jeongho; Lee, Jinwon; Yang, Jeongsam

ArticleIssue Date2022CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.36, no.6, pp.3109 - 3117PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Analysis of thermal environment and energy performance by biased economizer outdoor air temperature sensor fault

Kim, Chul Ho; Lee, Sung Chan; Park, Kyung Soon; Lee, Kwang Ho

ArticleIssue Date2022CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.36, no.4, pp.2083 - 2094PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Droplet generation with integrated 3D pneumatic actuator for orifice control

Lee, Chanju; Cho, Yongseong; Jung, Woojun; Lee, Jumi; Hwang, Yongha

ArticleIssue Date2022CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.36, no.1, pp.333 - 340PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Reconstruction of primitive-shaped pipe elbows from a triangular mesh in ship outfitting model

Na, Gun-Yeol; Yang, Jeongsam; Mun, Duhwan; Cheon, Sanguk

ArticleIssue Date2021CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.35, no.12, pp.5551 - 5560PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Mechanical and fracture properties of poly(ethylene terephthalate) with glycol/carbon nanotube nanocomposite films under accelerated weathering conditions

Choi, Min-Seok; Lee, Jin Hyoung; Choi, Byoung-Ho

ArticleIssue Date2021CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.35, no.9, pp.3837 - 3845PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Mesh-offset-based method to generate a delta volume to support the maintenance of partially damaged parts through 3D printing

Kim, Youngki; Kwon, Kiyoun; Mun, Duhwan

ArticleIssue Date2021CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.35, no.7, pp.3131 - 3143PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Predictive model for PV power generation using RNN (LSTM)

Park, Min Kyeong; Lee, Jong Man; Kang, Won Hee; Choi, Jong Min; Lee, Kwang Ho

ArticleIssue Date2021CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.35, no.2, pp.795 - 803PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Development of a new 3T1R type cable-driven haptic device

Cho, Youngsu; Hong, Taewoo; Cheong, Joono; Yi, Byung-Ju; Kim, Wheekuk; Jeong, Hyunhwan

ArticleIssue Date2020CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.11, pp.4721 - 4734PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Decoupling criterion for elastic-plastic seismic analysis of large-scale complex piping systems in nuclear power plants

Kim, Soo-Bin; Kim, Yun-Jae; Kim, Jong-Sung

ArticleIssue Date2020CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.11, pp.4563 - 4573PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Effect of damage evaluation method and cyclic hardening models on strain-based fatigue assessment to a piping system under seismic loads

Chang, Dong-Joo; Lee, Jong-Min; Nam, Hyun-Suk; Huh, Nam-Su; Kim, Yun-Jae; Kweon, Hyeong-Do; Kim, Jong-Sung

ArticleIssue Date2020CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.7, pp.2833 - 2844PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Performance investigation of a novel calorimeter for a heat pump system according to flow loops

Amoabeng, Kofi Owura; Lee, Kwang Ho; Choi, Jong Min

ArticleIssue Date2020CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.4, pp.1749 - 1763PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
A method for highly sensitive detection of silver nanoparticles using a micro-resonator and DNA assisted conjugation

Jang, Kuewhan; Park, Chanho; Park, Wooboum; Park, Jaekyeong; Park, Kyoungwoo; Na, Sungsoo

ArticleIssue Date2020CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.4, pp.1675 - 1681PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Characterization of engine oil additive packages on diesel particulate emissions

Kim, Kangjin; Si, Woosung; Jin, Dongyoung; Kim, Jeong-Hwan; Cho, Jaeho; Baek, Sungha; Myung, Cha-Lee; Park, Simsoo

ArticleIssue Date2020CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.34, no.2, pp.931 - 939PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
The mesh density effect on stress intensity factor calculation using ABAQUS XFEM

Kim, Ji-Su; Lee, Hyun-Jae; Kim, Yun-Jae; Kim, Yong-Beum

ArticleIssue Date2019CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.10, pp.4909 - 4916PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Efficient optimal force distribution method of the parallel mechanism with actuator redundancy based on geometric interpretation

Cho, Youngsu; Cheong, Joono; Kim, Min Gun; Yi, Byung-Ju; Kim, Wheekuk

ArticleIssue Date2019CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.6, pp.2915 - 2928PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Residence time distribution measurements for model flows based on laser-induced breakdown spectroscopy

임성균

ArticleIssue Date2019CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.4, pp.1987 - 1992Publisher대한기계학회
SCIESCOPUSKCI
Influence of high-power diode laser heat treatment on wear resistance of a mold steel

Park, Changkyoo; Kim, Jinwoo; Sim, Ahjin; Park, In-duck; Jang, Ho; Chun, Eun-Joon

ArticleIssue Date2019CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.2, pp.829 - 836PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Estimation of penetration equation parameters by comparing numerical analysis and experimental results

Cho, A. Hyoun; Park, Kang; Kim, Gun In

ArticleIssue Date2018CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.32, no.12, pp.5755 - 5765PublisherKOREAN SOC MECHANICAL ENGINEERS
SCIESCOPUSKCI
Estimation of exit angle for oblique penetration using numerical analysis

Shin, Ju Gyeong; Park, Kang; Kim, Gun In

ArticleIssue Date2018CitationJOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.32, no.12, pp.5767 - 5776PublisherKOREAN SOC MECHANICAL ENGINEERS
1 2 3 4
STATISTICS
Total View :9,526,962
Today View :20,354

RSS_1.0 RSS_2.0 ATOM_1.0

CONTACT US

(02841) 서울특별시 성북구 안암로 14502-3290-1114

COPYRIGHT © 2021 Korea University. All Rights Reserved.

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

BROWSE

English