ScholarWorks@Korea University

대한기계학회논문집 A

Journal Title

  • 대한기계학회논문집 A

ISSN

  • P 1226-4873 | 1226-4873

Publisher

  • 대한기계학회

Listed on(Coverage)

SJR2008-2019
CiteScore2011-2019
SCOPUS2017-2020
KCI(Ranking)2009-2019
KCI2001-2021
KCI(Candidate)1998-2000

Active

  • Active

    based on the information

    • SCOPUS:2020-10

Country

  • SOUTH KOREA

Aime & Scopes

  • The Transactions of the Korean Society of Mechanical Engineers A is a monthly periodical published on the 1st day of each month. The aim of the journal is to provide an international forum for the publication and dissemination of original works that contribute to the understanding of the following fields of mechanical engineering: Materials and Fracture & Reliability, CAE (Computer-Aided Engineering) and Applied Mechanics, Dynamics and Control, Design Engineering and Production Field. Manuscripts may fall into several categories including regular contributed papers, technical papers, solicited/unsolicited reviews or commentaries.

Homepage

Article List

41 - 59 out of 59 results.

SCOPUSKCI
A switching notch filter for reducing the torque ripple caused by a harmonic drive in a joint torque sensor

Kim, J.-H.; Kim, Y.-L.; Song, J.-B.

ArticleIssue Date2011CitationTransactions of the Korean Society of Mechanical Engineers, A, v.35, no.7, pp.709 - 715
SCOPUSKCI
Effects of axial misalignments on the torque specimens using finite element analysis

Kim, J.-H.; Kim, Y.-J.; Huh, Y.-H.

ArticleIssue Date2011CitationTransactions of the Korean Society of Mechanical Engineers, A, v.35, no.11, pp.1461 - 1469
SCOPUSKCI
Estimation of C(t) -Integral under transient creep conditions for a cracked pipe subjected to combined mechanical and thermal loads depending on loading conditions

Oh, C.-Y.; Song, T.-K.; Kim, Y.-J.

ArticleIssue Date2011CitationTransactions of the Korean Society of Mechanical Engineers, A, v.35, no.6, pp.609 - 617
SCOPUSKCI
Design of an economic service robot hand based on biomimetics and TRIZ

Ko, H.K.; Cho, C.H.; Kim, K.H.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.11, pp.1741 - 1747
SCOPUSKCI
Mis-Match limit load analyses and fracture mechanics assessment for welded pipe with circumferential crack at the center of Weldment

Song, T.-K.; Jeon, J.-Y.; Shim, K.-B.; Kim, Y.-J.; Kim, J.-S.; Jin, T.-E.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.1, pp.19 - 26
SCOPUSKCI
Design of backrest and seat pan of chairs on the basis of haptics-aided design method

Jin, Y.; Lee, S.-D.; Song, J.-B.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.5, pp.527 - 533
SCOPUSKCI
Human-oriented design of backrest of office chair using haptic-aided design and lumber angle prediction

Lee, S.-D.; Lee, H.-A.; Song, J.-B.; Chae, S.-W.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.11, pp.1581 - 1586
SCOPUSKCI
Sensitivity analyses of finite element parameters of laser shock peening for improving fatigue life of metalic components

Kim, J.-H.; Kim, Y.-J.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.12, pp.1821 - 1828
SCOPUSKCI
Assessment of effective factor of hydrogen diffusion equation using FE analysis

Kim, N.H.; Oh, C.S.; Kim, Y.J.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.6, pp.709 - 715
SCOPUSKCI
Limit loads for circular wall-thinned feeder pipes subjected to bending and internal pressure

Je, J.H.; Lee, K.H.; Chung, H.J.; Kim, J.S.; Kim, Y.J.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.11, pp.1675 - 1680
SCOPUSKCI
Welding residual stress determination and crack analysis in butt-welded thin-walled plate by finite-element method

Shim, K.-B.; Bae, H.-Y.; Jeon, J.-Y.; Song, T.-K.; Kim, Y.-J.

ArticleIssue Date2010CitationTransactions of the Korean Society of Mechanical Engineers, A, v.34, no.5, pp.589 - 596
SCOPUSKCI
복합 바퀴-궤도 메커니즘 기반의 소형 로봇

이장운; 김병상; 송재복

ArticleIssue Date2009Citation대한기계학회논문집 A, v.33, no.6, pp.545 - 551Publisher대한기계학회
SCOPUSKCI
세포 인장 자극기의 개발과 세포 인장 자극을 통한 성체 줄기세포의 골분화 유도

신현준; 이우택; 박석훈; 이선화; 박정호; 윤용산; 신현정

ArticleIssue Date2009Citation대한기계학회논문집 A, v.33, no.7, pp.629 - 636Publisher대한기계학회
SCOPUSKCI
원전 이종 금속 다층 용접부 잔류응력 예측을 위한 유한요소 변수 민감도 해석

김윤재; 송태광; 배홍열; 이경수; 박치용

ArticleIssue Date2008Citation대한기계학회논문집 A, v.32, no.9, pp.770 - 781Publisher대한기계학회
SCOPUSKCI
용접부 중앙에 표면균열이 존재하는 인장 평판에 대한강도 불일치 한계하중 해석 및 간략 J-적분 예측

송태광; 김윤재; 진태은; 김종성

ArticleIssue Date2008Citation대한기계학회논문집 A, v.32, no.5, pp.411 - 418Publisher대한기계학회
SCOPUSKCI
열하중 및 기계하중이 작용하는 원주 방향 균열 배관에 대한 V-계수 평가

송태광; 오창균; 김윤재

ArticleIssue Date2008Citation대한기계학회논문집 A, v.32, no.12, pp.1123 - 1131Publisher대한기계학회
SCOPUSKCI
공기 포일 베어링으로 지지되는 초고속 마이크로 터보차져의 구동 안정성 향상에 관한 연구

곽용석; 정진택; 이용복; 김창호

ArticleIssue Date2008Citation대한기계학회논문집 A, v.32, no.7, pp.541 - 548Publisher대한기계학회
SCOPUSKCI
고리 원전 가압기 노즐 용접부 잔류응력 예측 시 안전단 고려가 이종 금속 용접부 잔류응력 분포에 미치는 영향

김윤재; 송태광; 배홍열; 오창영; 이경수; 박치용; 전윤배

ArticleIssue Date2008Citation대한기계학회논문집 A, v.32, no.8, pp.668 - 677Publisher대한기계학회
SCOPUSKCI
예방 용접 Overlay가 원전 가압기 이종금속용접부 잔류응력 완화에 미치는 영향

송태광; 배홍열; 전윤배; 오창영; 김윤재; 이경수; 박치용

ArticleIssue Date2008Citation대한기계학회논문집 A, v.32, no.10, pp.873 - 881Publisher대한기계학회
1 2 3
STATISTICS
Total View :9,523,245
Today View :15,916

RSS_1.0 RSS_2.0 ATOM_1.0

CONTACT US

(02841) 서울특별시 성북구 안암로 14502-3290-1114

COPYRIGHT © 2021 Korea University. All Rights Reserved.

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

BROWSE

English